Gym Tech SteveEquipment · Moves · Flooring (201) 841-5157

Gym Tech Steve · Home & commercial gym equipment

The heavy pieces.Handled.

Equipment sales, moves, breakdown and reassembly, cable work and light fabrication, and custom-cut professional rubber flooring. One machine or a whole gym, with Steve on the job from start to finish.

Morris County and North & Central New Jersey

Steve, smiling, kneeling beside a cable machine with a wrench, tool belt on and toolbox open, in a bright gym with rubber flooring. Gym Tech Steve logo: a cast-iron weight plate reading GTS, Gym Tech Steve, Home & Commercial Gym Service, (201) 841-5157, Western Morris County, NJ. 30+ years. Steve on every job.

Services

Built for equipment that doesn't fit in a car

Commercial gym equipment is heavy, awkward and easy to damage, and it's easy to damage the house too. The work is knowing how each piece comes apart, how it goes back together, and how it's supposed to feel when it's done.

Equipment sales

Heavy strength and cardio equipment for home gyms, garages and commercial spaces, delivered and set up rather than left on the driveway.

  • Racks, benches, cable and selectorized machines
  • Plates, dumbbells and storage
  • Delivered, assembled and adjusted

Equipment moves

Moving a gym, buying a used machine from a seller across the county, or just getting a rack out of the basement before closing day.

  • Pickups from private sellers
  • Residential and commercial relocations
  • Floors, walls and stairwells protected

Breakdown & reassembly

Many machines won't clear a basement stairwell in one piece. Steve takes them down to parts, labels them, moves them and rebuilds them square and tight at the other end.

  • Weight stacks, frames and guide rods
  • Treadmills, ellipticals and bikes
  • Re-leveled and tested after setup

Repair & light fabrication

Frayed cables, worn pulleys and loose hardware are the usual reasons a good machine sits unused. Steve does the repair himself and makes small parts when the originals are hard to find.

  • Custom-length cables and ends
  • Pulley, bushing and hardware replacement
  • Brackets, spacers and small custom parts

Rubber gym flooring

Professional rubber flooring, measured and cut to the room, so it fits around posts, doorways and equipment instead of being pieced together with gaps.

  • Rolls, mats and interlocking tile
  • Custom cuts and clean seams
  • Lifting zones and platform areas

Complete gym builds

For an empty basement, a garage or a commercial room. Steve runs the layout, flooring, equipment, delivery and setup himself, so nothing gets lost between contractors.

  • Home and garage gyms
  • Studios and small commercial gyms
  • Building and community fitness rooms

Whole gyms

From empty room to first workout

A gym build goes in a fixed order. The floor goes down before the equipment. The equipment has to fit through the doors and suit the ceiling height. Everything gets tuned once it's set in place.

Walk-through

Steve looks at the room, the way in, the ceiling height and the floor underneath, and asks how the space will be used.

Layout & floor

Equipment placement and clearances are planned, then rubber flooring is cut and laid to fit that layout.

Delivery & build

Each piece is brought in, broken down where it needs to be, then reassembled and set in position.

Tuned & tested

Cables tensioned, stacks aligned, everything leveled and run through its full range before Steve leaves.

Where Steve builds

  • Basements
  • Garages
  • Home gyms
  • Studios
  • Small commercial gyms
  • Corporate fitness centers
  • Boutique hotels & spas
  • Condo & HOA fitness rooms

Professional rubber flooring

Cut to the room, not just laid in it

The floor is what you notice when it's done badly. Seams separate, edges curl, and a dropped dumbbell cracks the concrete underneath. Commercial rubber flooring done properly protects the subfloor, absorbs impact and sound, and stays flat for years.

Steve measures the room, checks the floor underneath, and cuts every piece to fit, including around posts, sump pits, doorways and stair landings.

Thickness and material depend on what's happening on that floor. Cardio and machines need less. Heavy free weights and dropped lifts need more. Steve will recommend what fits the room and the training.

Rolled rubber
Wide runs with few seams. Good for full rooms and commercial floors.
Heavy mats
Thick, dense pieces for lifting areas, under racks and in drop zones.
Interlocking tile
Works in odd-shaped rooms and is easy to extend or replace one tile at a time.
Lifting zones
Extra-thick areas for platforms and heavy lifting, set inside the rest of the floor.
Custom cutting
Fitted around columns, drains, thresholds and built-ins with tight edges and flush seams.

Cable work & light fabrication

Keep the good machine

A well-built cable machine or selectorized station can last decades. When it stops working, it's usually something small: a frayed cable, a worn pulley, a bent pin, or a part the manufacturer no longer makes.

Steve replaces cables at the correct length with the right ends, swaps pulleys and bushings, and fabricates simple brackets and spacers when the original part isn't available. That usually costs less than replacing the machine.

Cables
Measured, made and installed at the right length, with the correct ends and tension.
Pulleys
Worn, noisy or seized pulleys and their bearings replaced.
Weight stacks
Guide rods cleaned and aligned, selector pins and top plates sorted.
Hardware
Loose frames tightened, worn bolts, bushings and spacers replaced.
Small parts
Simple brackets and spacers made when original parts can't be found.

Before you call

A few photos get you a faster answer

Text these to (201) 841-5157. With them, Steve can usually tell you what the job involves and what it should cost before he comes out.

  • The equipmentA full shot of each piece, plus the make and model if there's a label
  • Where it is nowFloor level, stairs, and the path from the room to the outside
  • Where it's goingTown, floor level, and any stairs or elevator at the other end
  • Doorways & ceilingNarrowest doorway width and the ceiling height where it'll stand
  • For flooringRough room dimensions and a photo of the current floor
  • For repairsA close-up of the worn cable or part, and what the machine is or isn't doing

Service area

North & Central New Jersey

Based in Western Morris County and working across the region. If your town isn't listed, ask. Bigger jobs and commercial projects are worth the drive.

MorrisHome base
SussexCounty
WarrenCounty
SomersetCounty
HunterdonSome towns
PassaicSome towns
EssexSome towns
UnionSome towns

Questions

Common questions

Will it fit down my basement stairs?

Often yes, once it's taken apart. Many big machines break down into pieces that go through a standard stairwell. Send a photo of the machine and the stairs, plus the narrowest width, and Steve can tell you before anything gets moved.

I bought a used machine from someone else. Can you pick it up?

Yes. Steve breaks it down at the seller's, moves it, and rebuilds it at your place. While it's apart he'll check it over. Small fixes like a frayed cable can often be handled the same visit. If parts or hardware are missing, he'll tell you what's needed and price it before going further.

Do you only do whole gyms?

No. Single machines, one cable replacement, or flooring for part of a garage are all regular jobs. Whole gyms are simply the largest version of the same work.

Can you work on commercial equipment?

Yes. Commercial-grade strength and cardio equipment is the core of the business, in homes, studios and commercial fitness rooms.

How does pricing work?

It depends on the job: the pieces involved, stairs and access, distance, and materials for flooring or fabrication. Text photos and Steve will give you a clear quote. You can also see starting prices for common jobs.

Gym Tech Steve weight-plate logo with phone number (201) 841-5157.
Save the number · (201) 841-5157

Meet your gym tech

Hi, I'm Steve.

When you call Gym Tech Steve, you get me. Not a dispatcher, not a rotating install crew. I'm the one who looks at the job, quotes it, shows up with the tools and finishes it. On the big jobs I bring a helper, but I'm there for every one.

I like heavy equipment that works the way it's supposed to: cables running smooth, stacks sliding straight, floors flat and tight to the wall. Whether it's one worn cable or a full gym in an empty basement, I take the same care with it.

Send me a few photos and tell me what you've got. I'll tell you straight what it takes.

Talk to Steve directly

No call center or dispatcher. You talk to the person who'll be on the job.

(201) 841-5157
Claimed · your code
KEEPUP10

Give Steve this code when you text or call, before he quotes the job.

First job only. Applies to labor at Steve's normal rate. Saw the ad on keepuplocal.com.

Pricing

Straight prices. No surprises.

Starting prices for the jobs Steve does most. Every job is a little different, depending on stairs, distance and the condition of the equipment, so text a few photos for an exact quote before he comes out.

$119Service call

Talk first. Then a service call if he needs to come out.

Most problems start with a free call or text. Steve looks at your photos and video and tells you what he thinks it is. Sometimes it's a fix you can do yourself.

  • Includes the trip and the first 30 minutes of diagnosis
  • Credited toward the repair if you go ahead within 14 days
  • Return trips with parts: no second service call

Repairs & tune-ups

Repairs

Labor, $95/hr after the first 30 minutes. Parts are extra and quoted before they're ordered.

Treadmill not runningSafety switch, fuse, belt adjustment, sensor or loose connection. Often fixed during the service call.from$119
Treadmill belt or deck replacementLabor. Belt or deck quoted separately.from$190
Cable replacementOne cable, made to length and installed. Each additional cable on the same machine $60.from$120
Pulley or bushing replacementPer machine, plus parts.from$95
Tune-up, strength machineGuide rods cleaned and aligned, cables checked, hardware tightened.per piece$95
Tune-up, cardio machineCleaning, lubrication, belt alignment, electrical check.per piece$110

If a repair would cost more than about half the price of a comparable new machine, Steve will tell you before he starts.

Assembly & install

Assembly

Flat prices for one room, no stairs. New or used equipment.Used equipment must have all of its parts and hardware. If anything is missing, the price is TBD until Steve sees it.

Bench, bike or rowerflat$225
Treadmill or ellipticalfrom$275
Power rack or half rackFrame, J-hooks, safeties and basic attachmentsfrom$325
Power rack with cable attachmentLat pulldown or low row: pulleys, cables and weight stack set up and tensionedfrom$425
Functional trainer / cable crossoverfrom$425
Home gym with weight stackMulti-station machinesfrom$475
Wall-mounted rig or pull-up barAnchored to studs or masonryfrom$250

Moves

Moves & breakdowns

Steve brings the truck, straps, blankets and dollies.

Move one piece in the same houseRoom to room, no breakdown neededfrom$250
Break down, move and reassembleWhen it won't fit through a stairwell or doorway in one piecefrom$375
Pick up from a seller and deliverBroken down at the seller's, rebuilt and leveled at yoursfrom$425
StairsPer flight of about 12 steps. Applies to moves and assembly.per flight$100
Haul-away of old equipmentPer large piecefrom$175
Full home gym relocationQuoted from photos and an equipment listQuote

Rubber flooring

Flooring

Installation labor is priced separately from the rubber, so you can see both. Steve can supply the material or install what you've bought.

Mats or interlocking tile, installedMeasured and cut to the roomper sq ft$2.00
Rolled rubber, installedTaped or glued seamsper sq ft$3.00
Lifting platform or drop-zone insetfrom$250
Subfloor prepPatching, leveling, cleaning as neededper sq ft, from$0.75
Remove old flooringper sq ft$1.00
MaterialCommercial rubber supplied by Steve, quoted per jobQuote

Flooring jobs have a $400 minimum. Larger floors and full gym builds take a 50% deposit to order material.

Gym builds & plans

Gym builds & maintenance

Planning visitLayout, measurements and equipment list. Fully credited if you hire Steve for the build.$150
Complete gym buildItemized from the prices on this page: flooring, delivery, assemblyQuote
Home maintenance planYearly tune-up of up to 4 pieces, plus 10% off repair laborper year$249
Commercial maintenanceMonthly or quarterly visits for gyms, studios and building fitness roomsper piece$75

Travel

Travel & the fine print

Steve is based in Western Morris County. Travel is added once per job, not per visit. Farther than 45 miles? Ask. Bigger jobs are worth the drive.

Within about 15 milesRoxbury, Mt. Olive, Chester, Mendham, Randolph, Rockaway, Denville, Washington Twp., Hackettstown and nearbyIncluded
15 to 30 milesRest of Morris, most of Sussex and Warren, northern Somerset$35
30 to 45 milesSouthern Somerset, Hunterdon, and parts of Passaic, Essex and Union$65
Warranty90 days on repair and installation labor. 1 year on flooring seams and edges. Parts carry the manufacturer's warranty.
PaymentDue when the job is done: card, Zelle, Venmo or check. Parts over $250 are paid before they're ordered.
SchedulingVisits are scheduled for the next day or later. Same-day service is available when the schedule allows, at an added rate. Cancellations with less than 24 hours' notice are $75.
Claimed · your code
KEEPUP10

Give Steve this code when you text or call, before he quotes the job.

First job only. Applies to labor at Steve's normal rate. Saw the ad on keepuplocal.com.

Call Text